Fix Your Stuff Community Store

Logitech K860 Disassembly

Introduction

This disassembly will show you how to get into your Logitech K860.

What you need

  1. Logitech K860 Disassembly, Keyboard: step 1, image 1 of 2 Logitech K860 Disassembly, Keyboard: step 1, image 2 of 2

    • Unscrew all screws. Some screws are under the small resin stands.

    • Beware: One screw is placed right under the serial number on the sticker. This will void your warranty.

    • Edit: some plastic molds have two screws under the sticker. Location in photo.

    Edit

  2. Logitech K860 Disassembly: step 2, image 1 of 2 Logitech K860 Disassembly: step 2, image 2 of 2

    • (It's not me, the resizing tool here is a joke.)

    • Anyway, you need to unclip the wrist pad and unscrew some stuff again. Like 4-5 screws here.

    Edit

  4. Logitech K860 Disassembly: step 3, image 1 of 1

    • Disconnect the on/off switch from the back cover.

    • As you can see, all the plastic standoffs are melted and squashed so that you can take this plate off but only once.

    • I tried to crush some of them. It's doable, but time-consuming. The keyboard probably wouldn't have the same rigidity after all this.

    Edit

  5. Logitech K860 Disassembly: step 4, image 1 of 1

    • Now you are left with this beautiful view. You can unscrew the ground for the small board and the board itself. You can even unscrew 2 screws on either side of the keyboard.

    • What you cannot do is to take this whole metal back-plate off. Logitech is trying make it impossible to clean this stuff and see the membrane trickery.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

6 other people completed this guide.

Author

with 7 other contributors

AlexG

Member since: 12/02/17

256 Reputation

1 Guide authored

Badges: 4

+1 more badge

6 Guide Comments

Great guide! the part about the hidden screw under the serial number in particular was a life saver.

One thing that's not clear is which slots take the smaller vs the larger screws, it would help to annotate that as now I'm blindly screwing whatever fits.

michaelchirico4 - Reply

OK so IINM, the 6 small screws all go on the upper half of the reverse side. There is also one slot for a longer screw (closest to the power switch). Anyway the longer screws don't fit in the small slots so it's easy.

michaelchirico4 -

Great guide. But I have 2 buttons that are not working, if it can not get to te membrane how can i test it or clean it?

Victor Araki Miyazono - Reply

that's ridiculous that you can't do that. I have the same issue.

Artan Muzhaqi -

some water was dropped into keyboard and some keys is not working anymore. Indeed, if it now possible to see the membrane or too much hard to put it back, it seems does not make any sense to fix it. Logitech wins...

Ferreira - Reply

Add Comment

View Statistics:

Past 24 Hours: 11

Past 7 Days: 78

Past 30 Days: 313

All Time: 5,851